Netrom-Node mini-Howto
Caractéristiques du document
Version originale : |
||
Source de la version originale : |
||
Révision et date de la version originale : |
1.10 |
1998-10-19 |
Éditeur : |
||
Auteur : |
Karl Larsen <k5di AT yahoo DOT com> |
|
Licence : |
Licence LDP |
|
|
||
Version française : |
|
|
Source de la version française : |
|
|
Révision et date de la version française : |
|
|
Projet de traduction : |
||
Traducteur : |
|
|
Relecteur : |
|
|
État : |
|
|
Résumé du document (en version originale) :
This document describes how to setup the ax25-utilities package for Amateur Radio such that it makes Netrom Nodes for the Node program and the BBS software from John-Paul Roubelat, F6FBB. The DOS G8BPQ Switch makes a bbs node and many features, it was expected that the Linux ax25-utils would have a similar capability. This was not the case. Help came from John Ackerman, N8UR who put a message on the Linux-Ham SIG that he had done the BBS node and the info was on his web site! When the information was tried it didn't work properly but much was learned about the technique. Help from Tomi Manninen, OH2BNS did the trick. Nodes for the BBS and the Node and the DX Cluster were made and work fine.
Résumé du document (en version française) :
...
Historique
- 2009-12-27
Document probablement obsolète... À vérifier. -- JeanPhilippeGuérard 2009-12-27 21:22:59
